SCHWEGO® antimec 6312
Antiskinning additive for water-based and solvent-borne coating systems, free of ketoxime and aromates |
Technical data sheet |
Chemical base: | Antioxidant in solvent mixture | |
Properties: | SCHWEGO antimec 6312 has the following properties/fields of application:
|
|
Mode of action: | 1. Viscosity stabilisation The stabilisation is based on the oxygen binding properties of the antioxidant. SCHWEGO antimec 6312 promotes flow and through drying. 2. Prevention of skinning Thanks to a special ingredient reactions caused by oxygen are suppressed. |
|
Applications: | SCHWEGO antimec 6312 is recommended in almost all water-based and solvent borne coating systems. | |
Technical data: (Guide values) |
Appearance : slight brownish, clear to slightly turbid liquid Density (ISO 2811-1) : 0,98 g/cm³ Flash point (ISO 1523) : 47.0 °C |
|
Processing: | SCHWEGO antimec 6312 should be added to the mill base in order to get optimum use of its wetting properties. It es recommended to evaluate the optimum dosage by preliminary laboratory experiments. An addition of 0.1 – 1.0 % calculated on total system is recommended. | |
Storage: | Occasionally, slight sediment is formed. This does not adversely affect the quality of SCHWEGO antimec 6312 and there is no need to stir up the sediment. Subject to appropiate storage, the described properties of SCHWEGO antimec 6312 remain stable for at least 2 years, provided the original container is closed after use. |
|
Packaging: | 50/175 kg drum | |
The above information is based on our current knowledge and experience. No binding assurance in respect of certain properties or suitability for certain applications must be read into our information. Patent rights and other proprietary rights must be observed if necessary. Further safety instructions please learn from our material safety data sheet. | ||