SCHWEGO® antimec 8019
Antiskinning additive for water-based and solvent borne coating systems, free of butanon oxime and aromates |
Technical data sheet |
Chemical base: | Antioxidant in solvent mixture | |
Properties: | SCHWEGO antimec 8019 has the following properties/fields of application:
|
|
Mode of action: | 1. Viscosity stabilisation The stabilisation is based on the oxygen binding properties of the antioxidant. SCHWEGO antimec 8019 promotes flow and through drying. 2. Prevention of skinning Thanks to a special ingredient reactions caused by oxygen are suppressed. |
|
Applications: | SCHWEGO antimec 8019 is recommended in almost all water-based and solvent borne coating systems. |
|
Technical data: (Guide values) |
Appearance : light yellow to light brownish liquid Density (ISO 2811-1) : 0,83 g/cm³ Flash point (ISO 1523) : 16,5 °C |
|
Processing: | SCHWEGO antimec 8019 can be added to the coating at any formulation step. We recommend the addition at the let down process after the siccatives. The optimum dosage should be evaluated by preliminary laboratory experiments. An addition of 0.2 – 1.0 % calculated on total system is recommended. | |
Storage: | Occasionally, slight sediment is formed. This does not adversely affect the quality of SCHWEGO antimec 8019 and there is no need to stir up the sediment. Subject to appropriate storage, the described properties of SCHWEGO antimec 8019 remain stable for at least 2 years, provided the original container is closed after use. |
|
Packaging: | 40 kg / 160 kg drum | |
The above information is based on our current knowledge and experience. No binding assurance in respect of certain properties or suitability for certain applications must be read into our information. Patent rights and other proprietary rights must be observed if necessary. Further safety instructions please learn from our material safety data sheet. | ||