BLISTER FREE 88
Defoamer for solvent borne coating systems, biodegradable |
Technical data sheet | Brochure "Defoamer" |
Chemical base: | Surface active polymers in a solvent mixture | |
Properties: | BLISTER FREE 88 is an interfacially active additive, which influences the surface tension. This property reduces the formation of bubbles to a minimum during the production of coatings or during application. Any bubbles formed are quickly destroyed. BLISTER FREE 88 improves levelling. | |
FDA-approval: | The non-volatile compound of BLISTER FREE 88 is listed in FDA (U. S. Food & Drug Administration), title 21, Code of Federal Regulations (CFR), part 175.300. | |
Applications: | BLISTER FREE 88 is especially suitable in polyester systems free from paraffins. BLISTER FREE 88 shows also good defoaming in epoxy, PUR and acrylate based systems. | |
Technical data: (Guide values) |
Appearance : clear, colourless liquid Density (ISO 2811-1) : 0,88 g/cm³ Flash point (ISO 1523) : 44°C Active matter : 100 % |
|
Processing: | The dosage is 0.1 - 0.5 %, calculated on total system. BLISTER FREE 88 should be added at the beginning of production. | |
Storage: | Do not store BLISTER FREE 88 at temperatures below 5 °C and above 30 °C. Stir up before use. Keep it in a cool, well ventilated place. Subject to appropriate storage, the described properties of BLISTER FREE 88 remain stable for at least 2 years, provided the original container is closed after use. | |
Packaging: | 50/175 kg drum | |
The above information is based on our current knowledge and experience. No binding assurance in respect of certain properties or suitability for certain applications must be read into our information. Patent rights and other proprietary rights must be observed if necessary. Further safety instructions please learn from our material safety data sheet. | ||